The correct use and cleaning of mosquito lamp

The working principle of the electronic mosquito killer lamp is to use the phototaxis of mosquitoes to attract mosquitoes and cause death by electrocution. High-efficiency mosquito traps are used to efficiently attract mosquitoes and other harmful insects. Instant killing can be achieved by electrostatic shock. Insects; electronic mosquito killer circuit design current limit, low power consumption, high efficiency, as long as the power can be used without any chemical substances volatile. The air suction mosquito lamp has a fan, and it absorbs mosquitoes through the air flow, causing it to die. Air suction lamp is small in size and can be carried around. It is generally used in homes. The scope of mosquito control is limited to one room, and the electronic mosquito killer can be hung up. If it is placed in a place where mosquitoes often appear, the effect will be better.

When consumers purchase mosquito killer lamps, they must first try the switches. If the buttons are open and close, the sound is crisp and elastic, and the quality of electrical components is higher. Secondly, check the inside and outside of the mosquito killer lamps. Look for scratches or damage. The lifespan of an insect killer lamp depends to a large extent on the quality of the lamp inside. Therefore, it is necessary to carefully check the quality of the lamp when buying it. Cracks cannot be used.

Although the mosquito killer is environmentally friendly, the insect repellent is passive and a bit of a wait-and-see character. What needs to be reminded is that mosquito killers have a certain degree of danger, especially for families with children, and should be placed high to prevent children from touching them. In addition, do not use conductive objects into the high-voltage network to avoid electric shock. Anti-mosquito lamps should be placed at a height of 1.5 to 2 meters in order to achieve the best killing effect. It is a normal phenomenon that electric mosquitoes and flies emit electric “squeak” sound.

In addition, the dust on the light pipe should be cleaned regularly and the power grid cleaned with a small brush. When cleaning mosquitoes and fly sturgeons, you must cut off the power supply and use a screwdriver to short-circuit the power grid to discharge excess power. The air-mosquito lamp can be taken out for cleaning, but water must not be splashed in places where power is available. The last thing to note is that direct light from the electronic mosquito killer should be avoided.