Not surprisingly, this should be the most overclockable GTX1050Ti!

[PConline evaluation] to everyone today is a full evaluation of the graphics card Gigabyte GV-N105TG1 GAMING-4GD, given that this full name seems strange to the layman and complex and difficult to remember, here we abbreviate it as: Gigabyte GTX1050Ti G1 GAMING good And smile,

GIGABYTE GTX1050Ti G1 Gaming 4G Reference price: Loading... Image reviews Overview of quotation parameters

Gigabyte this year's G1 GAMING series of graphics cards all use the orange and black colors as the main color, black-based, orange is responsible for embellishment, coupled with a proper edge design, it touches quite a sense of technology.

That's right! This card has a back plate! After watching a non-public GTX1050Ti without a backplane, I finally saw the backplane! The whole card size is 219mm x 118mm x 40mm.

The external power supply is 6Pin, which is the same as most non-public GTX1050Ti.

Video output interface Gigabyte GTX1050Ti G1 GAMING and most non-public GTX1050Ti are different, equipped with three HDMI interfaces, only one DP interface and DVI-D interface (using the back of the head to know is to be compatible with more VR device series , laugh ~).

You're right! This card also has lights! And it is 16.8 million color RGB; after the top of the GIGABYTE will light up slowly, and the FAN STOP light next to also prompted us that this card is one of the many non-public GTX1050Ti support fan intelligent stop technology One of the products.

The XTREME ENGINE software developed by Gigabyte can easily adjust a variety of lighting modes and one-button overclocking, which we will mention in the following!

The last GIF is a wave of grass.

● Gigabyte GTX1050Ti G1 GAMING parameter specifications comparison:

GPU-Z screenshots

The card with a backplane is quite ridiculous. After removing the six screws on the back, it is necessary to lift the heatsink slightly to get rid of the three fans and the connection wires of the lamp to the PCB before the main part can be separated.

Gigabyte GTX1050Ti G1 GAMING uses an advanced version of Wind Force 2X cooling system, two 90mm large-size fans, positive and negative alternate fan design, blade blades, more cool!

At the same time, this video card is also one of the non-public GTX1050Ti using two soft magnetic composite heat pipe direct contact thermal design. (Of course not ancestral, laugh ~)

Pure black all-metal back plate with orange ornamentation.

The position of the inner power supply module is also affixed with a heat-conducting patch to assist the heat dissipation of the MOSFETs on the PCB; in addition, the heat sink fins for the MOSFET are attached, which can be considered as a conscience.

4+1 phase power supply design, to meet the GP107 small core, of course, is not a problem, the power supply is so inexplicably quite super.

PCB front

PCB back

There are very few empty solders on the PCB, the overall layout is orderly, and there is a certain gap between the components, which is more conducive to heat dissipation.

Also the core codenamed GO107-400-A1, four 1GB GDDR5 Samsung video memory, this is nothing to say.

● Test platform description:

● 3DMARK theoretical performance test:

Based on the positioning of GTX1050Ti, we only tested Time Spy and Extreme.

Theoretical test summary: ah! The 3DMark run by Gigabyte GTX1050Ti G1 GAMING is the author's current exposure to the highest number of non-public GTX1050Ti.

● Game performance measured:

In terms of games, we use the currently popular four games for testing, including "Tomb Raider 10", "Singularity Ashes", "Watching Pioneer" and "Blocking across the country."

Test Summary: Benefit from the high frequency, Gigabyte GTX1050Ti G1 GAMING can perform well in the face of many mainstream games, is regarded as a product that implements its own product positioning.

● Platform power consumption test:

In order to simulate the player's real use scene, and the graphics card is positioned as a low-power gaming video card, we will use the power consumption of the standby idle and full-loaded games to compare the power consumption of the graphics card with other graphics cards. .

Power consumption test summary: Even if the non-public version of high frequency plus external 6Pin power supply, the platform power consumption is still less than 200W, the overall view of a 350W power supply can meet the needs of this video card.

● Graphics temperature test:

Full load temperature (Click on image to enlarge)

Test summary: At room temperature 26°C, Gigabyte GTX1050Ti G1 GAMING's copying temperature is 57°C, which is excellent. It seems that the advanced version of Wind Force 2X cooling system is very strong.

● Card noise test:

Here we have a noise tester that tests the graphics card's fan noise when Furmark is fully loaded.

Test summary: Only 42.5 decibels during the pager, very quiet.

About noise:
0 - 20 db: very quiet, almost imperceptible; 20 -40 db: quiet, like whisper; 40 - 60 db: normal general indoor conversation; 60 - 70 db: noisy: denervated; 70 -90 db: Very noisy, nerve cells are damaged. 90 - 100 db: Intensified noise, impaired hearing; 100 - 120 db: Unbearable, one minute or temporary deafness. 120 decibels or more: Extremely paralysed or fully paralyzed; 300 decibels or more: People with a radius of 20 km cannot repair deafness.

Through the XTREME ENGINE software can easily set Gigabyte GTX1050Ti G1 GAMING into overclocking mode, this time the frequency of 1393 ~ 1507MHz, compared with the machine when it has increased by 26MHz, I believe that the careful adjustment of the last 1.4GHz certainly no problem!

● PConline graphics ladder diagram:

Ladder Diagram Description: Based on higher frequency and performance, we placed the GTX1050Ti G1 GAMING on the GTX1050Ti.

●PConline evaluation room summary:

GIGABYTE GTX1050Ti G1 Gaming 4G Reference price: Loading... Image reviews Overview of quotation parameters

In fairness, this card is one of the few cards that I have been able to pick out since the few months I have contacted so many non-public GTX1050Ti.

Let me talk about performance first. After all, the running points are there. The game is actually there. Although the running points are not necessarily what it means, but the points are high! I laugh~

Backboard, with; lights, also have (need to know these two most commercially available non-public GTX1050Ti are not); say some intimate small details, 5 interface HDMI accounted for 3, to be honest will buy a thousand yuan card The majority of the users still use the 1080P screen, thousands of screen or HDMI interface is mostly, considerate; again, FAN STOP indicator, like!

Needless to say the shortcomings, it is estimated that the performance can not be compared to RX470D, but if only on this point, all GTX1050Ti are not worth buying! In any case, this card is still the leader in the non-public GTX105Ti! As for how to choose? The user's own assertion.

1, on the machine 1367MHz high frequency, OC MODE frequency up to
1393MHz, powerful overclocking potential
2, advanced version of the wind force 2X cooling system, low temperature at full load
3.16 million color breathing lights + FAN STOP indicator light
4, 4 + 1 phase power supply, meet the GP107 required, and low power consumption
5, 4G large memory, adequate materials with backplane
6. It is very quiet even if it is fully loaded.

Performance is lost to the RX470D

12mm Metal Push Button Switch

12mm LED Metal Push Button Switch

Yeswitch 12mm Metal Pushbutton switch is CUL & CE certified, it offering a rating of 2A/36VDC. Additional features include IP65 rating, with Momentary and Self-Locking operation function and a long operating life of up to 1,000,000 life cycles (Momentary) and 500,000 (Self-Locking)

The 12mm series LED Metal Switches require 12mm panel cut-out size. LED pattern options include Dot, E-ring and Power Logo and Many LED color options are available.

Specification:

Our Advantages

From the purchase of raw materials to the finished product, all production process (product development/plating/mold and equipment processing/ metalpressing/ plasticinjection/semi-automatic and fully automated equipment assembly, etc.) are completed in the factory. Our metal pressing and plastic injection own the advantages of 100% self-made mold, from a single form to the various forms of application. And we continuously keep innovation and enhance the technology in order to collaborate with our customers to design the most sophisticated products. Yeswitch Electronics Co., Ltd., whether in production base or in quality assurance department in the head office, have professional equipment and technical personnel. In addition to the annual new product development, product improvement and testing are performed as annual plan to ensure that listed products maintain in best quality. Therefore, our long-term customers/partners, get the best quality of the switches.

LED metal pushbutton, Waterproof Metal Switch, UL metal switch

YESWITCH ELECTRONICS CO., LTD. , https://www.yeswitches.com