XLPE Insulated PVC sheath Alloy Cable is kind of cable, in which the rare earth high
compressed aluminium alloy is used as conductor, and PVC is used as Jacket
wound around. The insulation adopts XLPE material, featuring with fire & moisture resistance. The whole structure is
designed and manufactured elaborately based
on advanced international technology and equipment.
It has completely independent intellectual property rights and removed
the defects of aluminum cable systematically. It applies to both dry and moist
places at the temperature of 90ºC and
under. This cable presents excellent
mechanical performance.
Standard: GA306 Jacket: PVC
Conductor: aluminum alloy Cores: single core or multicores
Insulation: XLPE Feature: flame retarded
Rated voltage: 0.6/1KV, 8.7/10KV,
8.7/15KV, 26/35KV
Advantages:
Application:
Welcome to visit our factory to learn more about us. If
you have any questions, please feel free to contact us.
XLPE Insulated PVC Sheathed Alloy Cable XLPE Insulated PVC Sheathed Alloy Cable,XLPE Insulated Al Alloy Cables,Aluminum Alloy XLPE Cables,Al Alloy Armoured XLPE Cables Fujian Lien Technology Co.,Ltd , http://www.liencable.com
Liu Rui, the manager of Intermec Optoelectronics Technology, elaborated on the importance of phosphors in LED lighting with the theme of “The Change of Phosphor Worldâ€, as well as YAG, TAG, Silicates, Red Nitride Phosphor, Non-YAG Green Aluminate. Phosphor application. He analyzed the problems of poor consistency, uneven spatial distribution and difficulty in heat dissipation of the white LEDs in the lighting package, and proposed a new development direction-remote phosphor technology.
He introduced that Intel's ChromaLit remote phosphor lighting source will change the traditional solid-state lighting design mode, and also provide lighting designers with a new creative design space, color control and flexible and efficient design system. 
Liu Rui: Remote phosphor technology will drive the world of phosphors to change
On August 18th, the CTO Conference of the 9th High-tech LED Industry Summit held in conjunction with the 2012 High-tech LED Exhibition was successfully held in the AB meeting room of Hall 5 of Guangzhou Poly World Trade Center. The forum agenda was based on the upper and middle of the LED industry chain. The downstream is divided into three special sessions. The CTOs and executives of well-known enterprises in the LED industry chain are invited to share the latest cutting-edge technologies in the industry and discuss the technological development trends of the upper, middle and lower reaches.