With the development of science and technology, foreign scientists have been trying to develop a new type of illumination source plasma lamp. The plasma lamp is a new type of electromagnetic wave that has risen in the energy field in recent years, which stimulates the luminescent substance in the electrodeless glass lamp ball, so that the luminescent material produces a continuous visible spectrum, and only emits a small amount of UV and IR, which is a high-efficiency illumination system. At the 2010 Performance Equipment Technology and Stage Art Development Summit Forum, Professor Peng Miaoyan, director of the Institute of Audiovisual and Lighting Technology of Guangzhou University, proposed that LED lights and plasma lamps have become a competitive development. Screen Resolution office projector,projector for office use,projector at office depot,home office projector,hd office projector Shenzhen Happybate Trading Co.,LTD , https://www.happybateprojectors.com
LED lighting era is coming
The fourth-generation light-emitting diode (LED) is currently the fastest growing and is considered to be a new source with broad prospects.
LED has many advantages: (1), long life, up to 100,000 hours. (In incandescent lamps only 1000 hours or less) (2), low power consumption, power saving. (The above are the two most important advantages of LED) (3), the structure is firm. (4), the startup time is short. (5) The illuminator is close to the electric light source and has a small size. (6), can be made into thin lamps.
LEDs are currently widely used in the field of lighting. The more mature applications of LED lighting technology include: signal lighting, landscape lighting, local lighting (such as table lamps) and large-screen video display. And gradually enter the field of stage lighting.
LEDs are developing rapidly, but there are also shortcomings to be overcome: (1) insufficient brightness; (2) high price; (3) single variety: single plane arrangement mode, the beam is not adjustable (the spot is not adjustable); 4), sensitive to temperature: heat dissipation problem is more difficult to solve.
Then, in order to achieve wide access to the general lighting field, LEDs need to solve the following problems: (1) sufficient light flux, more than a thousand lumens; (2) light color close to white light; (3) good color rendering; (4) The appropriate price; (5), as artistic lighting or signal lighting, is to directly view the light emitted by the LED itself; and as ordinary lighting, it is to indirectly view the object illuminated by the LED.
The above points, especially the 1, 4, and 5 points, are still the weakness of LED and need to be further resolved.
New source ion source light source into LED competitor
The new source ion source is currently becoming a competitor to LED. Plasma lamps are considered to be a promising fourth-generation light source that can compete with LEDs due to their high luminous efficiency, long life and high color rendering. According to the data: LED's current advantage is more suitable for low- and medium-illumination applications; the advantage of plasma lamps is that they focus on high-illumination lighting.
Plasma lamps have many advantages. (1) The luminous efficiency currently achievable by the LIFI lamp is in the range of 60 LM/W to 120 LM/W. (2) The color rendering index (CRI) of LIFI lamps has increased from 80 to 96 in recent years. (3) The color temperature of the LIFI lamp is in the range of 6500K to 10000K. (4) The life of the LIFI lamp is up to 10,000 hours or even longer, which means that it can work for 3 years and 4 months under the condition of 8 hours of ignition per day. (5) LIFI lamps are especially suitable for commercial lighting, street lighting, architectural lighting and film and television stage entertainment lighting.
1, LIFI can be started quickly
One of the advantages of LIFI is that it has a high-speed start function comparable to LED. For ultra-high pressure mercury lamps, it usually takes 30 seconds from illuminance to stability, so it gives people the impression that the related products start slowly. The startup time of LIFI only takes 1~2 seconds, almost the same as LED.
2. Long service life.
Mercury lamps are used for thousands of hours, and LIFI has the same long life as LEDs. Basically, there is no need to exchange lamps. The theoretical lifetime is 25,000 hours, and the fixed brightness is 80% reduced. It basically has the same service life as LCD TVs and ion TVs. As a product, there is no need for the user to exchange it personally.
3, the wide range of color gamut is comparable to LED
Spectrally, the red and green illuminating colors have surpassed the LEDs. Although they are not as good as the green ones, they also surpass the mercury system. According to the performance gamut seen by TOTAL, it is surprising to reach 144% of sRGB.
The reason why these advantages are also lies in the principle of action. LIFI still uses the shape of a spherical bulb, so it cannot be changed to a mercury-based luminaire in use. A compound of Shivas and a metal halide is enclosed inside the bulb, first causing an electrical boundary inside, thereby ionizing the internal Sivas to produce ions. The ionized Sivas and halogen processing are then gasified. Let the two blend together to produce white light.
According to the data: LED's current advantage is more suitable for low and medium illumination applications. The advantage of plasma lamps is that they focus on high-illumination art lighting. Plasma lamps are considered to be a promising fourth-generation light source that can compete with LEDs due to their high luminous efficiency, long life and high color rendering.
There are generally three screen resolutions for office projectors:
One is a 4:3 screen suitable for office PPT playback. The first is the SVGA machine with the lowest price and the highest cost performance. This kind of machine is generally priced at around 2500 and has powerful performance. The disadvantage is that the resolution is 800X600, which is relatively low. The second is the XGA machine, which is an upgraded version of the SVGA machine with a resolution of 1024X768.
The other is the 16:10 aspect ratio screen used by some foreign-funded enterprises, which is the 1280X800 resolution of WXGA. However, with the transparent price of 1080p projectors, more and more companies will choose full HD 1080p projectors as their office projection solutions.
Office Projector Features
According to the needs of different office environments, office projectors are roughly divided into three categories.
One is a conventional projector that is placed or hoisted in the conference room, the second is a Portable Projector that can be carried around, and the third is an ultra-short-throw projector that is convenient for work reports and speeches.
Wireless Office Projector
With the advent of the Internet era, the emergence of a series of wireless office series has added new members to the office projectors. The wireless office projector is realized by the built-in wireless module of the ordinary office projector. Wireless office makes people do not need to switch signal lines frequently in office meetings, allowing people to have a better experience in meetings!