Which is better with 2835 and 5050 lights?

First of all, it is explained here that the lamp strip refers to the LED lamp bead soldered on the copper wire or the strip flexible circuit board by a special processing technology, and then connected to the power source to emit light, and is named after a light band when it emits light. The 2835 and 5050 in the title actually refer to the model of the LED bead, not the strip, and the strip does not have a model.

Therefore, which of the lamp strips 2835 and 5050 is actually refers to which model of the lamp beads 2835 and 5050 is good. Let's take a look at the difference between the lamp beads 2835 and 5050.

Which is better with 2835 and 5050 lights?

Package size

The number of lamp bead models (eg 2835, 3014, 3528, 5630, 5050) is actually the size of their package. The package size of the lamp bead 2835 is 2.8mm*3.5mm*0.8mm, and the package size of the lamp bead 5050 is 5.0mm*5.0mm*1.5mm.

Lamp beads 2835 size

Which is better with 2835 and 5050 lights?
Lamp beads 5050 size
Which is better with 2835 and 5050 lights?

The main parameters

The main differences between the two parameters are as follows:

2835 lamp beads main parameters

Which is better with 2835 and 5050 lights?
Which is better with 2835 and 5050 lights?
5050 lamp beads main parameters
Which is better with 2835 and 5050 lights?
Which is better with 2835 and 5050 lights?

light intensity

The 2835 lamp strip has a wide width, which makes the light-emitting area large, the light output rate is high, and the strength can reach 13-15LM, which also solves the problem that the fluorescent lamp has a zebra crossing.

Which is better with 2835 and 5050 lights?

Application range

2835 lamp beads are mostly used for indoor light pipes, panel lights, light bars, advertising sign modules, etc.;

5050 lamp beads are mostly used for outdoor lighting wall washers, line lights, guardrail tubes, point light sources, etc.

Which is better with 2835 and 5050 lights?

to sum up

In general, the 2835 type light strip has a better effect than the 5050 type light strip . Of course, it is still much more practical to use to look at the specifications of the two, depending on the actual situation and individual needs.

Flat Cable

Flat Control Cable Also known as festoon cable, this flat cable fits in confined spaces such as overhead cranes and hoists. It sends signal and data to operate, measure, or regulate automated equipment.

Raw cable can be UL2651, UL20251 ,etc

Flat cable, IDC cable, flat cable wiring, ribbon cable harness, flexible flat cable

ETOP WIREHARNESS LIMITED , https://www.oemmoldedcables.com