FUNCTION DESCRIPTION
Countdown
socket has an AC outlet, the maximum can output 230 V16A of power,
there are two control modes, that is, countdown off and countdown on. It
is convenient to control the equipment which needs to switch off or
turn on AC. improve the safety of the use of some equipment and save
more energy.
SET TIMER
1,Countdown
plug in the socket, all indicator lights red flash three times, at this
time the socket has no output, for the normal state, into the countdown
state. Click the button, the first red light up, the socket output
after an hour off, and then short press the button can set the socket
timing of 2 H.4H.6H.8H.10H.OFF.
2,Long
press button 3s, all indicator lights green flash three times, at this
time the socket has output, for the regular open state, into the
countdown on state. Click on the button, the first green light on, the
socket is closed an hour later, and then press the button to set the
socket countdown 2 H.4H.6H.8H.10H.OFF.
3,Press button 3 longer S, all indicator lights red light flash 3 times again into countdown mode.
4,Select
the required countdown time mode, the corresponding mode countdown
lights up, start countdown until the end of the countdown time. The
outlet that controls the output will start or stop the output.
5,After the countdown starts, the time indicator will change automatically from high to low until the countdown is over.
NOTE:
1,Check that the power connection is good.
2,Use only indoors and in dry places.
3,This product does not convert AC voltage.
4,Maximum load not exceeding 16A 3680W.
5,Grounding is required for safety.
Countdown Timer Socket Switch, Countdown Timer Plug,Countdown Timer Plug Socket, Energy Saving Countdown Timer Switch Socket, Countdown Timer Switch NINGBO COWELL ELECTRONICS & TECHNOLOGY CO., LTD , https://www.cowellsockets.com The Ministry of Environmental Protection recently released three standards, such as Acoustic Environmental Quality Standards, Environmental Noise Emission Standards for Industrial Enterprises, and Noise Emission Standards for Social Living Environments, and improved China's environmental noise standard system.
Feng Bo, Director of the Standards Division of the Science and Technology Standards Department of the Ministry of Environmental Protection, said that the release of the new standard has improved the national environmental noise standard system; expanded the scope of application of the standard, and solved the problem of low-frequency noise and lack of noise control requirements outside the city; The standard applies to the object.
According to Feng Bo, the "acoustic environmental quality standard" is applicable to the acoustic environment quality evaluation and management of the five types of acoustic environment functional areas in urban and rural areas. For the areas around the airport that overlap with the five types of functional areas, the clear provisions do not apply to this standard. Implementation of the "Aircraft Noise Environmental Standards around the Airport". However, for ground noise in the area around the airport, the Acoustic Environmental Quality Standards still need to be implemented.
The "Environmental Noise Emission Standard for Industrial Enterprises Boundary" applies to the management of environmental noise emissions from industrial enterprises and fixed equipment boundaries, and also applies to units that emit noise in external environment such as institutions, institutions, and groups. In view of the fact that some of the fixed equipment used in industrial production activities may be independently dispersed, the standard stipulates that the boundaries of various noise-generating fixed equipment are the boundaries of actual land occupation.
The "Social Living Environment Noise Emission Standard" specifies boundary noise emission limits for equipment and facilities that may cause environmental noise pollution in commercial cultural and entertainment venues and commercial business activities. The "Social Living Environment Noise Emission Standard" does not cover all social life noise sources, such as the noise generated by the service facilities of the building, the noise of public places such as streets and squares, and the neighborhood noise such as home decoration.
Zhao Yingmin, director of the Department of Science and Technology Standards of the Ministry of Environmental Protection, said that the revision of the three environmental noise standards fully considered the current changes in noise pollution situation and environmental management needs, fully implemented the concept of people-oriented, building a harmonious society, and improved the coordination of standards. Operability will play an important role in China's economic, social development and environmental protection work.
In the next step, the Ministry of Environmental Protection will revise the longer-aged "Aircraft Noise Environmental Standards around the Airport" and "Building Construction Boundary Noise Limits". For traffic noise, based on the "Boundary Noise Limits and Measurement Methods" standard, the Ministry of Environmental Protection will integrate and formulate environmental noise emission standards for traffic trunk lines, distinguish between new and existing facilities, and propose control requirements.