Reliable high-power switching power supply production and circuit diagram

Probe domestic switch needle KG-300K needle head diameter is 3.0mm normally open switch needle
High-power led lamp beads 1W white light Sanan 30mil high power LED lamp beads imitation lumens
Shunluo Inductance Power Inductor SWPA Series First Class Agent
MOS power IC full range

Description of the circuit diagram of "Reliable High-Power Switching Power Supply": This figure is a simple and reliable high-power switching power supply product (used on large lights) designed for a factory. The following describes the transformer:

(EI-50L) is the inductor for the storage of electric energy (EE-50 core) or (EI-50 core), (EI-50 core) is the output transformer, according to the circuit diagram. (EG6 is a magnetic ring with a diameter of 12 mm). The winding is described on the circuit diagram.

The no-load test is less than 20MA, the conversion efficiency is greater than 90%, and the maximum power is 800W. (Input AC current 3.1A at 60V/13.5A)

Switching power supply circuit diagram



Dip Plug IDC Connector

Antenk dip plug connector Insulation Displacement termination connectors are designed to quickly and effectively terminate Flat Cable in a wide variety of applications. The IDC termination style has migrated and been implemented into a wide range of connector styles because of its reliability and ease of use. Click on the appropriate sub section below depending on connector or application of choice.the pitch range from 1.27mm,2.0mm, and 2.54mm here.

Dip Plug Connector



IDC DIP Plug Connectors Key Specifications/Special Features:
Materials:
Insulator: PBT, glass reinforced, rated UL94V-0
Contact: phosphor bronze or brass
Electrical specifications:
Pitch: 1.27/2.0/2.54mm
Current rating: 1A, 250V AC
Contact resistance: 30M Ohms (maximum)
Insulation resistance: 3,000M Ohms, minute
Dielectric withstanding voltage: 500V AC for one minute
Operating temperature: -40 to +105 degrees Celsius
Terminated with 1.27mm pitch flat ribbon cable
Number of contacts: 06,08, 10, 12, 14, 16, 20, 24, 26, 30, 32,34, 40, 50, 60 and 64P
With RoHS mark
Used for ribbon cables


DIP Plug Connectors Application

Wire to Board
Apply to Industries : PC, IPC, Consumer Electronics, Automotive, Home Appliance, Medical

Dip Connector,Dip Plug Connectors,Dip Direct Pulg Connector,IDC Plug Connector,Idc connector dip plug,1.27mm Dip Plug Connector,2.0mm Dip Plug Connector, and 2.54mm Dip Plug Connector

ShenZhen Antenk Electronics Co,Ltd , https://www.antenksocket.com