Overhead Line Insulation Sleeve
Buckle type insulation sheath is mainly used for insulation protection of overhead bare wire, reliable performance, convenient and quick installation.
Since it was put into the market, it has been widely used in the insulation protection of electrified railway and bare line of power grid.
The buckle type insulation sleeve has the characteristics of safe and reliable electrical performance, convenient installation, no need for free end, no fire and so on.
In the insulation protection of power line crossing trees, obstacles and strengthening insulation protection and other places, Gradually replace insulation bushing, composite insulation adhesive tape, waterproof tape, high and low voltage insulation tape.
Overhead Line Insulation Sleeve,Overhead Power Line Insulation Sleeve,Protective Wire Sleeve,Earth Wire Sleeving CAS Applied Chemistry Materials Co.,Ltd. , https://www.casac1997.com
On June 19th, Lelei Optoelectronics (Shanghai) Co., Ltd. exhibited its streamlined LED floodlight F2012A series at the 2009 Guangya Exhibition. The floodlight uses a patented waterproof and ventilated screw plug to insulate the wick from the water. The professional design uses special protective components for inductive lightning strikes and static electricity (ESD) to ensure the safety of the lightning storm.
Lamp appearance
Dimming Decoder: The advantages of integrating the dimming decoder with the LED luminaire into an integrated design:
1. The problem of external control system wiring and decoder waterproofing is reduced, and the installation cost of the LED control system is low.
2, save installation costs. System installation and commissioning is convenient and fast, to ensure the quality of the LED system.
Wide range of input voltage: full voltage, 100-240VAC ± 10, design advantages;
3, full voltage design, suitable for the world and China's regional voltages, especially suitable for areas with large voltage fluctuations, full voltage can ensure the brightness and life of LED lamps.
4, full-voltage design of the lamp, can reduce the problem of external power supply wiring and power supply waterproofing, so that LED products and systems installation costs are low, saving installation costs; installation is convenient and fast, to ensure the quality of LED products and systems.
structure:
1. Integrated heat dissipation structure design, which increases the heat dissipation area by 80 compared with the general structure design to ensure LED luminous efficiency and service life;
2. The sealing ring adopts German imported anti-aging silicone rubber raw materials;
3. The lamp body bracket can accurately adjust the longitudinal angle through the dial, and combined with the rotating structure of the chassis, the three-dimensional arbitrary angle adjustment of the lamp body can be realized.
Full color change: 16.7 million kinds of RGB synthetic true color, to achieve synchronization, chase, water and other changes.
The light output of the lamp when using different manufacturers' chips: 