What is 5G CPE? 5G Cpe,Wifi 6 Router,5G Wifi Router,5G Sim Card Router Shenzhen MovingComm Technology Co., Ltd. , https://www.movingcommiot.com
1 
5G CPE is a kind of 5G terminal equipment. It takes 5G signals from a carrier's base station and converts them into WiFi or wired signals, allowing more local devices (phones, tablets, computers) to access the Internet. It can be seen that 5G CPE is similar to the function of the "optical network unit" for home fiber broadband access.
What is a WiFi router?
WiFi routers are also known as wireless routers or access points.
A WiFi router acts as a Wi-Fi transmitter. It connects directly to a modem, router or switch via cable. This allows it to receive information from the Internet and transmit information to the Internet. Phones, tablets, laptops and other devices can pick up its Wi-Fi signal and then connect to the Internet.
What is the difference between 5G CPE and WiFi router?
The 5G CPE is actually a combination of a 5G modem and a WiFi router. With an independent 5G CPE, the device can access the Internet directly through the WiFi signal or the LAN port of the CPE. Of course, the 5G SIM card needs to be inserted into the SIM card slot of the CPE. However, a WiFi router will not be able to provide Internet access without connecting to a modem or router via cable.
To provide users with greater flexibility and reliability, many 5G CPE routers not only support 5G networks and 4G LTE networks, but also come equipped with WAN Ethernet ports for surfing the Internet. For local networks, WiFi 6, WiFi 5, and LAN ports are usually supported. Some models, such as the Hocell 5G CPE M111, are also equipped with telephone ports for VoLTE/ VoNR voice services.
What are the advantages of 5G CPE over ONU?
ONU is a kind of CPE, and the difference between ONU and 5G CPE is that the former connects to optical fiber access network equipment, while 5G CPE connects to 5G base stations.
There is also a question, since there is an ONU, why do you still need 5G CPE, and will 5G CPE replace ONU?
Let's start with the conclusion, of course not.
The current 5G CPE products all use the same or similar 5G chips as 5G mobile phones, have strong 5G connectivity, support SA/NSA networking, and are compatible with 4G/5G signals. In terms of speed, 5G CPE is similar to ONU.
The advantages of 5G CPE
1. Mobility and
Unlike traditional ONUs, which can only be used in fixed locations, 5G CPE can be "mobile." Where there is a 5G signal, 5G CPE can be used.
For example, when we go on a family vacation to a suburban estate, we can use 5G CPE to set up a Wi-Fi 6 high-speed hotspot that allows all family members to go online and share videos on social networks.
Another example is when a company is away at a trade show, it can use 5G CPE to provide Internet access to visitors and employees.
Traditional "fibre broadband" is relatively easy to set up. You go to the sales office and request a package, and then you can open it. But cancelling is tricky. Today's broadband services have a contract period. Before the end of the agreement period, you can not arbitrarily stop it. If you need to move, you have to switch to fiber broadband, which is also very troublesome. As for 5G CPE, as long as you have a 5G mobile phone SIM card, you can get high-speed Internet access.
For young people who are renting, as well as small businesses that need Internet service, 5G CPE is an ideal choice because of its mobility, fast Internet service registration and termination. 5G CPE is also suitable for remote areas or places with difficult terrain where fiber is virtually unavailable. Due to its large area and small population, many parts of the world began to use CPE long ago. They use 5G Outdoor CPE to receive signals from base stations and convert them into raw signals to access the Internet.
5G CPE can be upgraded to small base stations
5G CPE modifies 4G or 5G as a WiFi hotspot. WIFI devices can be converted via 5G CPE to access 4G or 5G networks.
Further, the WIFI hotspot, including the information processing and transmission within the CPE, is divided into 2 completely separate channels. The internal network channel has its own wi-fi, which is supervised by a person, and also has an account password verification. The external network channel is regulated and managed by the carrier. Two-way verification, remote monitoring, encrypted transmission, vibrant passwords, strict isolation of software and some devices to meet carrier-grade security requirements, complete isolation of indoor and outdoor wi-fi, extrannetwork-channel authentication of customer SIM cards,
5G CPE can be upgraded to a small base station, with both WiFi LAN and micro-base station functions. Good signal at the window, negative signal inside the car. Install a 5G CPE micro-base station by the window of your home and connect it to a power supply (or bring your own power supply).
It can access 4G and 5G networks through the CPE's external network. The phone charges, SMS charges, and information charges generated by the CPE are included in the phone SIM card number, but are not included in the CPE device. Peripheral WIFI devices without SIM cards, computer tablets (generally with WIFI), without wi-fi can get the USB user interface wi-fi card, through the WIFI Intranet access to 4G/5G network, resulting in traffic charges Input number corresponding to the CPE SIM card.
5G CPE micro base station, no matter where you go, as long as there is a 4G/5G signal by the window, there are mobile phones indoors, there are other terminal tools with SIM cards, and WIFI, you can call the Internet standby to solve the problem of indoor invisible. WIFI tools without SIM cards can also pass through the Intranet.
5G CPE applications
1. 5G CPE will act as a smart home gateway
In addition to providing Internet access, 5G CPE will also act as a smart home gateway in the future.
The demand for home routers has been the focus of competition among many vendors, because the router itself brings profits, as it is the gateway to the entire home network service and the entry platform for digital home operations. The 5G CPE serves the same purpose as a router. It will be the intelligent gateway for the unborn 5G family and the fulcrum for the intelligent life of the whole family.
With 5G CPE, users can control a variety of smart devices in their homes and connect everything, significantly enhancing the life experience of family members.
5G CPE has great potential for enterprise demand
In addition to consumer demand, 5G CPE has a very broad operational prospect in terms of enterprise demand.
Take smart factories, for example. In the future, all the devices and gears in the factory will be networked. 5G CPE can act as a unified traffic inlet and outlet for all devices in an area (shop floor), providing low-cost, high-speed network connectivity for these devices.
With the increase of application scenarios, 5G CPE will support more communication protocols other than 5G (such as Bluetooth, UWB, etc.), and truly become the control center of all devices.
3. Pipe network monitoring
Urban heating monitoring, natural gas network wireless monitoring, urban water supply network monitoring.
conclusion
All in all, 5G CPE is very important for both households and businesses.
With the full rollout of 5G network construction, 5G signal coverage is getting farther and farther. The demand for 5G CPE will continue to increase, and there will be more and more application scenarios around 5G CPE.
Changes in the wind: changes in the international standards of lamps (2)
Class 0 luminaires are luminaires that rely on basic insulation as protection against electric shock. This means that the accessible conductive parts of the luminaire (if such parts) are not connected to the protective conductors in the fixed line of the facility, and once the basic insulation fails, it has to rely on the environment. Class 0 luminaires provide protection against electric shock only under basic conditions, and provide protection against electric shock under fault conditions (ie, when insulation fails). Class 0 luminaires have not been allowed for wiring rules in CENELEC countries in Europe. These countries are Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Ireland, Norway, Sweden and the United Kingdom. In addition to the special equipment known as "isolation devices" in Italy, the wiring rules do not allow the use of Class 0 lamps. In Japan, Class 0 lamps are only allowed for power supply voltages from 100 to 127V. (2) Class I tools Class I lamps mean that the lamp's protection against electric shock not only relies on basic insulation, but also includes additional safety measures, that is, connecting the accessible conductive parts to the protective earthing conductors in the fixed line of the facility, so that Accessible conductive parts are not energized when the basic insulation fails. Class I luminaires provide protection against electric shock under normal conditions by relying on basic insulation. Under fault conditions (ie, when insulation fails), they are connected to the protective earthing conductors in the fixed line of the facility by means of accessible conductive parts to provide protection against electric shock. Class I luminaires can be either double insulated or reinforced, or have special low voltage (SELV) powered components. (3) Class II tools Class II lamps mean that the protection against electric shock not only relies on basic insulation, but also has additional safety measures, such as double insulation or reinforced insulation, but there is no protective grounding measures or installation conditions. Class II luminaires provide protection against electric shock under normal conditions by relying on basic insulation. Under fault conditions (ie, when insulation fails), additional insulation or reinforced insulation is provided to provide protection against electric shock. Class II luminaires may have components that are safely powered by extra low voltages, but may not have grounded components. (4) Class III lamps Class III lamps refer to lamps that are protected against electric shock by relying on the power supply voltage as a safety extra low voltage and that do not produce a voltage higher than the safety extra low voltage. Class III luminaires should not provide protective grounding. In summary, Class 0 lamps are less secure than Class I, Class II, and Class III lamps. Imagine a movable luminaire with a Class 0 metal casing. Once the basic insulation fails, the live parts may touch the metal casing and there is a risk of electric shock when used. In the previous example, a portable luminaire that was replaced with a Class I metal housing may not be dangerous to the user. China's electronic standard GB8898-2001 "Audio, video and similar electronic equipment safety requirements" has long stipulated that the existence of Class 0 electronic products is not allowed; China's household appliances standard GB4706.1-1998 "Safety of household and similar electrical appliances Part 1: General requirements 》Allow the existence of Class 0 home appliances; China's current effective lamp standard GB7000.1-2002 also allows Class 0 lamps to exist. Compared with Class I luminaires and Class II luminaires, the cost of Class 0 luminaires is lower because of the cost of measures such as grounding or additional insulation. In addition, consumers may not have professional knowledge and often purchase prices. The low luminaires make the Class 0 luminaires occupy a large number of indoor luminaires, especially in the use of household luminaires. This also makes many manufacturers are willing to produce Class 0 luminaires, but has now revised GB7000. 1-2002 standard. The GB7000.1 standard that will be published soon will not allow the existence of Class 0 lamps. In other words, Class 0 lamps are bound to be eliminated in China.