A Small Computer System Interface (SCSI) connector, also pounced as [scuzzy" connector, is used for physically connecting and transferring data between computers and peripheral devices.
SCSI is the small computer system interface, which is an independent processor standard used for the system level interface between computer and intelligent devices (hard disk, floppy, optical drive, printer, scanner, etc.). It is an intelligent universal interface standard, which has the function of communicating with various types of peripherals. SCSI uses the standard software interface of ASPI (SCSI programming interface) to make the driver communicate with the SCSI adapter installed inside the computer. SCSI interface is widely used in high-speed data transmission technology on minicomputers. SCSI interface has many advantages, such as wide application range, multitask, wide bandwidth, low CPU utilization, and hot plug.
SCSI connectors type and interfaces
Centronics 50-pin connector: The Centronics 50-pin connector was once the most widely used SCSI connector. An external connector only, the Centronics is a SCSI-1 connector that looks the same as the Centronics cable that attaches to a parallel port printer. The Centronics 50-pin cable comes in male and female styles, and gender changers and cable converters are commonly available. Although used on older SCSI devices and external drive enclosures, this interface is no longer heavily used, due to its slow speed and short cable lengths.
SCSI SFF 8482: Also called "4x internal" by some vendors. This is a connector with the same form factor as SATA with the addition of a "bump" to key it specifically for SAS. (SATA drives can be plugged into SAS controllers, but SAS drives will not function with a SATA controller; hence, the necessity for the key bump on the connector.) As the name says, it's meant to be used internally, i.e., inside the computer case.
SCSI SFF 8484: Also called "32-pin" or "MultiLane". This is a high density connector usually intended to plug into the motherboard, controller, or backplane itself. Cables with this connector on one end usually have four individual SFF 8482 connectors on the other. Scsi Connector,Half Pitch Scsi Connectors,Scsi Lead Half Pitch Male,SCSI (SAS) Connectors,Female Scsi Connector,SCSI Connectors I/O Connectors,Manufacturers and Suppliers in China ShenZhen Antenk Electronics Co,Ltd , https://www.antenkconn.com
Height
6m to 30m or other height customer requirement
Suit for
Electric Power Distribution Transmission Steel Tower
Shape
Conoid ,Multi-pyramidal,Columniform,polygonal or conical
Material
Usually Q345B/A572,minimum yield strength>=345n/mm2
Q235B/A36,minimum yield strength>=235n/mm2
As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490,
to ST52
Strength
2.5KN,5KN,8KN,10KN,12KN
Torlance of the dimenstion
+- 2%Â
Optical assembly of lighting fixture
  IP 65
Electroshock resistant protective grade
 Grde I
The casing anti-corrosion performance
 Class II
Working atmosphere of lighting fixture
-35 ºC~+45 ºC
 Surface treatment
  Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required
Joint of Poles
 Insert mode,innerflange mode,face to face joint mode
Design of pole
  Against earthquake of 8 grade
  Wind Speed
160km/hour
Minimum yield strength
335mpa
Minimum ultimate tensile strength
400mpa
 Max ultimate tensile strength
 620mpa
StandardÂ
ISO9001Â
Length of per section
Within 14m once forming without slip joint
Welding
We has past flaw testing.Internal and external double welding makes the
welding beautiful in shape.
Welding Standard :AWS (Â American Welding Society )Â D 1.1
 Thickness
1mm to 30mmÂ
Packages
Our poles as normal cover by Mat or straw bale at the top and bottom ,anyway also can following by client required , each 40HC or OT can loading how many pcs will calculation base on the client actually specification and data.
Style
Size and styles are veriable as per customer request Â
Raw material test →Â Cutting →Molding or bending →Welidng (longitudinal )→Dimension verify
→Flange welding →Hole drilling →Calibration →Â Deburr→Galvanization or powder coating ,painting →Recalibration →Thread →Packages
Yangzhou Shixin Landscape Lighting company is located in Tianshan Industrial Park of Yangzhou, which is the largest and best street light manufacture in China. The company is specialized in production of street light, LED street light, solar street light, pole, high mast, garden light, lawn light and so on. We have 189 workers, 20 technicists, and 25 serve clerks. We have been working in this line from 2004.And we have done many big projects abroad and won good reputation from our customers.
FAQ
1:How many cycles full charge&discharge about your battery?
 In 50% discharging deepness, it can be cycled for 1,200 times; in floating charging and discharging status, it can be cycled for 5000~6000 times.Â
2.How to Choose the System Voltage  12V or 24V or for normal street Light ?Â
We can design the System for 12v or 24v for solar street Light or 220-380V for normal street light . Â
3.What's the main difference between mono and polycrystalline solar panel?
production process and cost. Polysilicon technology is more mature since it is an early technology compared with Monosilicon.Â
4.The controller of your solar street light has dual time control function?
our solar charge controller is designed with dual time control function, you can set up the lighting time and divide it into two parts, like 12 hours (6 hours full power lighting +Â 6 hours half power lighting)
Welcome to contact us a.s.a.p.
Contact person:Dongzhou Zhao
M.B.+8618652772323
Â
dongzhou.zhao
Â
 Specification introduction
Height
6m to 30m or other height customer requirement
Suit for
Electric Power Distribution Transmission Steel Tower
Shape
Conoid ,Multi-pyramidal,Columniform,polygonal or conical
Material
Usually Q345B/A572,minimum yield strength>=345n/mm2
Q235B/A36,minimum yield strength>=235n/mm2
As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490,
to ST52
Strength
2.5KN,5KN,8KN,10KN,12KN
Torlance of the dimenstion
+- 2%Â
Optical assembly of lighting fixture
  IP 65
Electroshock resistant protective grade
 Grde I
The casing anti-corrosion performance
 Class II
Working atmosphere of lighting fixture
-35 ºC~+45 ºC
 Surface treatment
  Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required
Joint of Poles
 Insert mode,innerflange mode,face to face joint mode
Design of pole
  Against earthquake of 8 grade
  Wind Speed
160km/hour
Minimum yield strength
335mpa
Minimum ultimate tensile strength
400mpa
 Max ultimate tensile strength
 620mpa
StandardÂ
ISO9001Â
Length of per section
Within 14m once forming without slip joint
Welding
We has past flaw testing.Internal and external double welding makes the
welding beautiful in shape.
Welding Standard :AWS (Â American Welding Society )Â D 1.1
 Thickness
1mm to 30mmÂ
Packages
Our poles as normal cover by Mat or straw bale at the top and bottom ,anyway also can following by client required , each 40HC or OT can loading how many pcs will calculation base on the client actually specification and data.
Style
Size and styles are veriable as per customer request Â
Raw material test →Â Cutting →Molding or bending →Welidng (longitudinal )→Dimension verify
→Flange welding →Hole drilling →Calibration →Â Deburr→Galvanization or powder coating ,painting →Recalibration →Thread →Packages
Yangzhou Shixin Landscape Lighting company is located in Tianshan Industrial Park of Yangzhou, which is the largest and best street light manufacture in China. The company is specialized in production of street light, LED street light, solar street light, pole, high mast, garden light, lawn light and so on. We have 189 workers, 20 technicists, and 25 serve clerks. We have been working in this line from 2004.And we have done many big projects abroad and won good reputation from our customers.
FAQ
1:How many cycles full charge&discharge about your battery?
 In 50% discharging deepness, it can be cycled for 1,200 times; in floating charging and discharging status, it can be cycled for 5000~6000 times.Â
2.How to Choose the System Voltage  12V or 24V or for normal street Light ?Â
We can design the System for 12v or 24v for solar street Light or 220-380V for normal street light . Â
3.What's the main difference between mono and polycrystalline solar panel?
production process and cost. Polysilicon technology is more mature since it is an early technology compared with Monosilicon.Â
4.The controller of your solar street light has dual time control function?
our solar charge controller is designed with dual time control function, you can set up the lighting time and divide it into two parts, like 12 hours (6 hours full power lighting +Â 6 hours half power lighting)
Welcome to contact us a.s.a.p.
Contact person:Dongzhou Zhao
M.B.+8618652772323
Â
dongzhou.zhao
Â
High-density 50-pin connector: The high-density 50-pin connector is used on scanners and Jaz drives. It is one of the more common SCSI connectors and is usually used to connect SCSI-2 devices. Both ends of the cable are usually 50-pin male, while the sockets on the host adapter and external devices are 50-pin female.
DB 25-pin connector: The DB 25-pin or D Sub 25 is by far the most widely used connector. This connector is used for parallel and serial printers in addition to the many other devices available. Both ends of the cable are usually 25-pin male, while the sockets on the host adapter and external devices are 25-pin female. This cable is almost always an external connector.
Note: DB-25 SCSI CABLES are not compatible with and should not be used as serial or printer cables; serial cables and printer cables should not be used or attached to DB-25 SCSI adapters. You can short out the SCSI host adapter or the motherboard by using the wrong cable. Marking cables is the best way to avoid this.
IDC50 connector: The IDC50 is the most common internal SCSI connector. It is very similar to the standard IDE internal ribbon cable. The IDC50 SCSI cable is considerably wider then an IDE ribbon cable; in fact, it is usually the widest standard internal cable in use. This is a standard SCSI-2 10MBps internal SCSI cable. Many low-end cables have only two or three connectors, allowing for one or two devices to be attached to the cable. Seven-device cables are available, though they are often expensive and require a large case, as the cables may be four or five feet long.
High-density 68-pin connector: The high-density 68-pin connector is the SCSI connector of choice for SCSI-3 host adapters and peripherals. There is an internal ribbon cable version that looks very similar to the IDC50 connector. Many low-end cables have only two or three connectors, allowing for one or two devices to be attached to the cable. Seven-device cables are available, though they are often very expensive and require a large case, as the cables may be three or more feet long. Both ends of the external cable are usually 68-pin male, while the sockets on the host adapter and external devices are 68-pin female.
SCA 80-pin Micro-Centronics connector: SCA stands for Single Connector Attachment, a type of disk drive connector that includes connection pins for the power cables as well as the data wires. A SCA connector uses an 80-pin plug and socket to connect peripherals. This connector combines power, data channel, and ID configuration for fast installation and removal. SCA connectors are typically found only on high-end SCSI hard disks. The SCA interface was designed to provide a standard connection for systems using drives that can be hot-swapped. SCA makes swapping SCSI hard drives much easier than with traditional SCSI cables, plugs, and sockets. An adapter enables SCA drives to fit into standard SCSI enclosures.
Serial Attached SCSI SFF 8470: Also called "4x external" by some vendors. This is simply a version of the SFF 8484 that's meant to be used with external (i.e., not located within the case) drives.
35FT Galvanized Octagonal Transmission Steel Pole
Model NO.: SX-DG
Guarantee: 3-5years
Apply: Street, Road
Thickness: 3-5mm
Color: Customer′s Request
Diameter: 65-200
Light Source: LED Light
Color Temperature(CCT): Warm White
Lamp Body Material: Aluminum Alloy
Lamp Power: 30W
Power Supply: AC
Average Life: 5500h
IP Rating: IP65
Voltage: 220V
Trademark: xinyao
Transport Package: Canrton or as Customer′s Request
Specification: CE, SGS, CQC, ISO9001
Origin: Jiangsu, Yangzhou
HS Code: 940540900
Model NO.: SX-DG
Guarantee: 3-5years
Apply: Street, Road
Thickness: 3-5mm
Color: Customer′s Request
Diameter: 65-200
Light Source: LED Light
Color Temperature(CCT): Warm White
Lamp Body Material: Aluminum Alloy
Lamp Power: 30W
Power Supply: AC
Average Life: 5500h
IP Rating: IP65
Voltage: 220V
Trademark: xinyao
Transport Package: Canrton or as Customer′s Request
Specification: CE, SGS, CQC, ISO9001
Origin: Jiangsu, Yangzhou
HS Code: 940540900
 Specification introduction