Lock Motor product introduction:
Safe Lock Motor, also known as The anti-theft lock motor, in the field of electronic Lock technology, Safe Lock Motor is a mechanical Lock components associated with the electronic control unit of the important parts.
Functions: it is widely used in various intelligent locks, such as Shared bicycle lock, fingerprint lock, glass lock, safe lock, hotel lock, family lock, inductive smart lock, etc
Features: Motor For Safe Lock is based on micro precision reducer development, small intelligent micro precision reducer can do 10 mm in diameter, is widely used in safe, locks, smart locks, sensor intelligent lock;
This kind of motor has the characteristics of low noise, low energy consumption, small volume, light quality, high precision, large torque and durability
Method of use: the best stable in horizontal plane, installed on the Safe Lock Motor output shaft parts, cannot use a hammer to knock, knock prone to press into the dc Safe Lock Motor drive, may cause damage to internal components, and cannot be used in the case of blocked.
Operating temperature range:
Gear Motor For Safe Lock should be used at a temperature of -10~60℃.
The figures stated in the catalog specifications are based on use at ordinary room temperature catalog specifications re based on use at ordinary room temperature (approximately20~25℃.
If a Safe Lock Motor is used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.
Storage temperature range:
Gear Motor For Safe Lock should be stored ta a temperature of -15~65℃.
In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.
Service life:
â—Use with a load that exceeds the rated torque
â—Frequent starting
â—Momentary reversals of turning direction
â—Impact loads
â—Long-term continuous operation
â—Forced turning using the output shaft
â—Use in which the permitted overhang load or the permitted thrust load is exceeded
â—A pulse drive ,e.g.,a short break,counter electromotive force,PWM control
â—Use of a voltage that is nonstandard as regards the rated voltage
â—Use outside the prescribed temperature or relative-humidity range,or in a special environment.
â—Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.
when it come to volume production,we're a major player as well .each month,we rurn out 600000 units,all of which are compliant with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department to service to you
Looking forward to your inquiry. Welcome to our factory.
Safe Lock Motor,Motor For Safe Lock,Dc Motor For Safe Lock,Gear Motor For Safe Lock Shenzhen Shunchang Motor Co., LTD. , https://www.scgearmotor.com
1L/Min Commercial Duty Fogging Cooling Systems:
These products are manufactured using heavy-duty high pressure axial pump, misting/ fogger nozzle, stainless steel/brass ferrule fittings,Brass/stainless steel fittings, hardware, pressure regulator, Flexible high pressure PE hose pipe, LCD electric control panel, electric motors.Please see detailed description below:
Standard features:
1, Duplex cylinder high pressure heavy-duty Axial pump;
(1), Forged brass manifold, provides high strength and corrosion resistance.
(2), Anodized die-cast crankcase, with large cooling fin for maximum heat dissipation.
(3), Hardened and precision grinding crankshaft, for maximum durability and long life.
(4), First-grade ceramic plunger, to increase resistance to pitting and wear, for maximum durability.
(5), Strengthened one-piece alloy aluminium connecting rod.
(6), Italy u-packing.
(7), Reinforced pop-off valve cage.
(8), NSK bearing, for maximum life and load distribution.
(9), Bolt-on pressure adjustable unloader
(10), pressure regulating valve, built-in bypass,with solenoid valve (BPS)
2, Glycerin filled pressure gauge;
3, In line mounted with high pressure solenoid valve to prevent water leakage from the nozzle during the every second when the machine stop working;
4, Heavy duty industrial electric motor with thermal overload;
5, Single/three-phase 220w, 1400 RPM, self ventilated;(can do different voltage and rate)
6; ON-OFF switch;
7, Pressure switch to protect pump against dry running;
8, Weatherproof powder coated steel cover to protect the pump and motor;
9, Bride with brass flexible coupling, easily to install and prevent leakages;
  Connection Type: Quick Slip Lock, Thread type;
10, Brass / SS (304,316) anti-drip Cleanable Fog Nozzle (Orifice Range: 0.15mm to 1.00 mm);
Nozzle Orifice:Ceramic,SS,Ruby,
11, Flexible PE Hose;Tube size: 3/8" (9.52mm)
12, 50 micron polypropylene high filtration filter system provent small articals(bigg than 0.05mm) going into the machine,Four Stage Filter System 5 + 10 + 25 + 50 Microns;
13, LCD Electric Control Panel;
14, Cyclic Digital Timer;
15,Diameter of Fog:< 7μM
16,Drop the Temperature:4-10°C;
17,Spray Effective Are:100CBM;
18,pray Sustainable Time:12 hours;
19, Volume:Support 15m hose, 14 connectors, and 13 nozzles (Orifice Range:0.15mm);
20.Accessories List:Nozzle, Nozzle connector, Tubing, Tubing Cutter, Water filter, Tee, Elbow, End, End Plug, Union, Male/female adapter, ball valve and water filter, etc.
Function:
1, Increase profitability
2, Reduce stress
3, Refresh the atmosphere
4, Cooling
Residential cooling, outdoor cooling, commercial place cooling
5, Control humidity(humidification):
Industrial, agricultural and horticultural:Green house, garden, livestock farming;
6, Reduce dust & smell (Dedusting and Deodorization):
Industry process, bulk powder, cement plant, foundry dust, fly ash control, waste transfer, recycling process
7.Insect Control
Please use water-soluble chemical to kill insect
Applicaton:
(1) Stockbreeding: Deodorization, disinfection, cooling
(2) Diggings and painting area: Cooling, dust-catching, static-elimination
(3) Greenhouse, wine-cellar: Cooling and wetting
(4) Spinning industry: Wetting, static-elimination
(5)Outdoor plaza, sports, open coffee, beer bars: Sight, cooling, mosquito-killing
(6) Kursaal, park, restaurant: Sight, cooling, mosquito-killing
(7) School, factory and warehouse: Cooling
Advantage:
Stop working automaticly when lack of water;
Fog can spray with different frequencies;
Controlled by the Timer;
Fog can spray at different humidity range according to the data setted;
Â
Model
Flow Rate
Pressure
Pump Type
Rpm
Power Require
With LCD Screen
Cover
Dimensions
G.W.
YDM-2802 3WA-860
1L/MINÂ
60BARÂ Â Â 860PSI
3WA-860AÂ Â Â Â Â Â Duplex Axial Pump
1400R/MIN
 220W 220v 50Hz              Single phase
Yes
Steel
43×22×29CM
11KGS
